• Diameter: 1mm
• Color: – Black
• Material: – Polyolefin
• Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
• Minimum Shrinkage Temp: +70C
• Full Shrinkage Temp: +110 deg C

Description:

This is great quality Polyolefin HeatShrink Tube Polyolefin HeatShrink Tube – Top Quality Heat Shrink sleeve Polyolefin are excellent for insulation. Perfect for electrical, electronic, automotive, hobby, electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and repairs etc. Good electrical, mechanical and chemical performance. Ideal for Hobbyists and Model Makers, Electrical, Electronic, Automotive and General Purpose uses.

Specification:

• Diameter: 1mm
• Color: – Black
• Material: – Polyolefin
• Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
• Minimum Shrinkage Temp: +70C
• Full Shrinkage Temp: +110 deg C
• Maximum Operating Temperature: -55degC to +125degC
• Tensile strength: 10.4 Mpa
• Dielectric strength: 20 kv/mm

How to use:

• Take a Heat Shrink Tube with diameter slightly larger than Cut it according to the required length.
• Use a heat source to heat up the tube for 10-20 seconds.
• You will notice the Heat Shrink tube shrinking down and upon completion it will hold the wire firmly. In market, 2 types of HeatShrink Tubes available. Polyolefin HeatShrink Tube.
• Material- Polyolefin.
• Feels like rubber.
• Does tubes don’t get cracked with time.
• Works best for insulation.
• Is being used in military, aerospace and railway industries, etc.

Package Included:

1 x 1mm Black Polyolefin Heatshrink-Tube Sleeve (5 Meter)