Slicer Settings Suggestion:

• Retraction speed: over 80MM/S.
• Retraction length: 2.5-4MM.

If you encounter issues with PLA clogging, consider the following steps:

1. Accelerate the retraction speed. In case of speed limitation in the firmware, make modifications using M203 E200.
2. Enhance the extruder acceleration by adjusting the firmware settings through M201 E9000.
3. Depending on your machine setup, decrease the retraction length.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not fix the 2 supporting screws for the thermal block like in the standard hotend on the CR-10 printer.
6. Ensure there are no spaces between the heatsink and the heat break.

Please note that the color of the silicone sock, included as a gift, will be chosen at random.

Package includes:
1 x Heatsink.
1 x Heat Break.
1 x Nozzle.
1 x Heating Block.